Nova-Tech PGW Series - Manual (Page 36)

Page 36 of 44
14.0 PERIPHERALS
The peripherals that can be used with the balance are the following:
14.1 DENSITY DETERMINATION KIT
(for 0.001g units only)
The Density Determination Kit includes everything needed to carry out
precise and repeatable measurement. The kit allows a sample to be weighed
in air and then a liquid to determine the density of the sample. It also allows a
glass sinker of known volume to be weighed in air or in a liquid, to determine
the density of the liquid.
14.2 ANTI-VIBRATION TABLE
The anti-vibration table is a support for laboratory balances that isolate the
balance from vibration through the floor. The table has a granite surface for
the balance with a separate table top surrounding the balance.
14.3 ADAM PRINTERS
The Adam printer is a compact thermal printer which is ideal for use with
laboratory balances. There are 3 versions, one to print data as it is received
from the balance, second one prints data and time along with weighing data if
enabled by the balance and the other one has the ability to perform statistical
analysis of the weighing results if enabled by the balance.
© Adam Equipment Company 2007