0 keypad, Numeric entry method – Nova-Tech PGW Series User Manual

Page 11

Page 11 of 44

7.0 KEYPAD

The keypad has the following keys to operate the balance.

Keys

Primary function

Secondary function

To turn the balance to ON or
OFF

[

Î0/TÍ] or

[Esc]

A combined zero and tare
function

To escape from setup
functions and modes

[Unit] /

Ð or

[Down]

Selects weighing units by
cycling through a set of
enabled units

To decrement or change a
displayed value or scroll
through options backwards

[Mode] /

Î or

[Advance]

Selects functions by cycling
through a set of enabled
functions, for example parts
counting, animal weighing,
percent weighing or density

To advance a flashing digit
by one position to the right

To go back by one step
during setup functions

[Print] /

Í or

[Back]

Instructs the balance to print
data

To advance a flashing digit
by one position to the left

[Cal] / or

[Up]

Starts the calibration function

To increase or change a
displayed value or scroll
through options forward

[Setup]/
or [Enter]

Enters a function or saves a
value during setting up such
as entering unit weight or
check weighing limits manually

7.1 NUMERIC ENTRY METHOD

To set a value when required, use the keys as given below-

- [Up] and [Down] keys to increase or decrease the flashing digit,
- [Advance] and [Back] keys to advance or move back the digit and
- [Enter] key to accept the value