Nova-Tech PGW Series - Manual (Page 15)

Page 15 of 44
15 Sing Taels tl S All 0.026455464 37.799375
12 Mommes mm All 0.266666951 3.749996
16 Tolas T All 0.085735323 11.663804
17 Ticala ti All 0.0612395 16.32933
18 Newtons N All 0.00980665 101.921623
It is possible to set the balance to display only grams. Grams will always be
one of the units enabled, by default.
The balance displays the alternate weighing units with as much precision as
possible. For example, the 450g x 0.001g balance could weigh up to:
Unit Maximum d =
g. 450g x 0.001g
ct. 2250 0.005
mg 450000 1
GN 6944.52 0.02
dr 253.972 0.001
oz 15.87325 0.00005
ozt 14.86780 0.00005
dwt 289.356 0.001
MM 119.9995 0.0005
tl.T 12.00000 0.00005
tl.H 12.02275 0.00005
tl.S 11.90415 0.00005
T 38.5808 0.0001
ti 27.5577 0.0001
9.4 FUNCTIONS
When weighing, the user can access the applications that have been enabled
(see section 13.2).
The following applications are available in this version (2.35):
• Weighing
• Parts counting
• Percent weighing
• Check weighing
• Animal / dynamic weighing
• Density determination
The selectable functions can be enabled using a similar method to the Units
above by turning the functions on or off.
© Adam Equipment Company 2007