Nova-Tech PMB Moisture Analyzer - Manual (Page 65)

63
| P a g e © Adam Equipment Company 2009
11.6 CONTINUOUS OUTPUT
The analyzer can use the interface to send the weight only to the output. This
setting is configured in the Serial Communications parameters, see section
10.1.1. When the output is set for Continuous the test reports are not
printed during a drying test and test results are not stored.
The weight will be [printed using the time interval set with the Continuous
parameters, from 01 to 99 seconds.
The format is xxxxxxxxx where the first 9 characters are the weight
with leading zeros replaced by spaces. First character is a “-“ for negative
weight.
The output will appear as:
_ _ _ 12.345
_ _ _ 12.345
etc.