Nova-Tech PMB Moisture Analyzer - Manual (Page 41)

39
| P a g e © Adam Equipment Company 2009
To delete all test results from memory, during normal weighing mode press
the [Dspl] key until the display shows
When the selection shows DELETE ALL , press [Setup/Enter] to delete all
test results. The display will ask if you are sure you want to delete all results.
press [Setup/Enter] again. The display will count down from 99 to 0 during
the time it takes to remove all the files.
To delete an individual test result continue as above except press the [Dspl]
or [Test] will change the option to DELETE..
When the selection shows DELETE , press [Setup/Enter] and the display
will show the first stored test result using the file name given it when stored.
Press the [Dspl] or [Test] key to change the file name to the next available.
When the desired test result is found press the [Setup/Enter] Key to delete
just this file. The display will then show DELETED then the next available
file. Press [Setup/Enter] to delete this file if desired.
Pressing [Tare] will return the analyzer to normal operation.
DELETE ALL
RES00033