Nova-Tech PMB Moisture Analyzer - Manual (Page 55)

53
| P a g e © Adam Equipment Company 2009
10.2 STORE AND RECALL ANALYZER SETTING FROM USB MEMORY
To store or recall analyzer settings on a USB memory , simply plug the
memory into the USB hub interface. The analyzer will detect the memory
has been inserted and display a screen to guide you.
The display will show a message showing the USB is installed:
To select the option of storing the configuration data to the memory press the
[Dspl] key to change the display to select Configuration Store
Press [Select] to enter the configuration saving function. The display will
show a suggested file name. The name will be the next logical name for the
configuration file based on what data is already on the USB memory. For
example if CONFIG1 and CONFIG2 are already stored, then it will display
CONFIG3.
Press [Select] to confirm the action. Or press [Tare] to escape back to the original USB
display.
CONFIG LD
USB
CONF STORE
USB
CONFIG3
USB
CONFIG3
Store