Nova-Tech PMB Moisture Analyzer - Manual (Page 56)

54
| P a g e © Adam Equipment Company 2009
Once the file has been saved the display will show
For 2 seconds then return to the USB display.
To recall any stored test procedure press the [Dspl] key to show the configuration load
screen.
Press the [Select] key to enter the test load function. The display will show the file name
of the first file found.
To load this file press the [Select] key again. Or to choose a different file press the [Dspl]
key to advance through the other files available.
To continue the USB device should be removed. the analyzer will return to normal
weighing automatically. Or press the [Tare] key to escape back to normal weighing.
To store or recall other files plug the USB memory back into the analyzer.
STORE OK
USB
CONFIG LD
USB
CONFIG LD
USB
CONFIG1
USB
CONFIG1
LOAD