MIDLAND Geopoint Box SMS - Manual (Page 41)

40
Reading and Writing SMS Commands
Reading Commands
Command Meaning and Values Example
rpos Read instantaneous GPS position data.
The tracker can reply in 3 different ways:
A) POS: = GPS position in real time.
B) LAST POS: = no GPS signal. The
reply message contains the last detected GPS data.
C) POS: NO GPS DATA = from the tracker switching
on, the GPS signal has not been detected.
NOTE: the date and time refer to:
SMS sending, in case of Reply A •
last detected GPS data, in case of Reply B •
Command: rpos
Reply A:
POS:41g37.8283N,012g28.8191E,
ALT:0262m,DIR:023g,SPEED:0050km/h,
SAT:09,07/05/26,15:56
Reply B:
LAST POS:45g37.8283N,
008g28.8191E,ALT:0262m,
DIR:023g,SPEED:0050km/h,
SAT:09,07/05/26,15:56
Reply C:
POS: NO GPS DATA
Description:
45g37.8283N Lat. in degree, min.
008g28.8191E Long. in degree, min.
0262m
Altitude in m
023g Direction in degree
0050km/h Speed in km/h
09 Satellites number
07/05/26 Date (yymmdd)
15:56 Time (hhmm)