Power on and off, Led indicators, Preliminary procedures – MIDLAND Geopoint Box SMS User Manual

Page 25

Preliminary Procedures

Power On and Off

To switch the tracker on/off, press the

key situated in the upper part of the device

for 2 seconds. At tracker switching on/off, the 3 LEDs will light up together at the same
time for 1 second and an acoustic signal will be emitted.

WARNING: Do not switch on the tracker when its use is prohibited or

when it may cause interference or danger (refer to the chapter Safety
Instructions).

NOTE: The GPS receiver is switched on automatically only if the

programmed tracker functions require the GPS system use.

LED Indicators

The LED indicators on the device front part shows the tracker main functions status.

ON / OFF