MIDLAND Geopoint Box SMS - Manual (Page 32)

31
Use of the Functions
The following list shows all the events which can be detected and recorded automatically by the tracker.
power on/off •
low battery •
receiving a data call •
making a GPRS call •
hanging up a call •
motion on/off •
GSM network available/unavailable •
GPS signal available/unavailable •
entry/exit from Geofence area •
entry/exit from Anchor area •
fi rmware update •
SOS alarm •
memory erasing •
roaming on/off •
network GSM provider changing if roaming on •
Programming
To record position data, it is necessary to set the recording parameters.
1) Set the recording parameters Using the provided software
WARNING: If the Power Save Mode with cyclic position SMS or cyclic GPRS connection has
been enabled, the tracker position will be recorded at each automatic switching ON. The set
Rate and Distance parameters will not be considered.