MIDLAND Geopoint Box SMS - Manual (Page 35)

34
Use of the Functions
Programming
To use this function, it is necessary to set the phone number where the alarm messages will be sent, defi ned
the circle centre and then set the radius.
1) Set the phone number Using the provided software
2) Defi ne the circle centre Sending the complete SMS command (wanc)
3) Set the radius value Sending an SMS command (wanc)
Using the provided software
After having carried out the entire programming procedure, the tracker must be fi tted to the person or animal
to be monitored. When the tracker detects the exiting from the pre-established area or the ri-entering, it sends
an alarm SMS containing its position data to the preset phone number.
Example of the SMS message displayed on the mobile phone, when the tracker enters the area
GEO,ID:GLORIA,ANCHOR ENTER,POS:45g37.9481N,008g28.9992E,ALT:0218m,07/04/10,10:09
Example of the SMS message displayed on the mobile phone, when the tracker exits the area
GEO,ID:GLORIA,ANCHOR EXIT,POS:45g37.9481N,008g28.9992E,ALT:0218m,07/04/10,10:09
The SMS message structure of the Anchor function is described here below:
GEO Tracker type.
ID:−−−−−− Tracker name preset by the user through the provided software.
ANCHOR ENTER Alarm message.
POS:−−−−−.−−−−−,−−−−−.−−−−− Latitude and longitude of the geographical position.
ALT:−−−−.−
Altitude in m.
−−/−−/−−,−−:−− Event date and time (yy/mm/dd hh:mm).