MIDLAND Geopoint Box SMS - Manual (Page 31)

30
Use of the Functions
CYCLIC GPRS CONNECTION
The cyclic GPRS connection allows to connect the tracker automatically at a programmed rate for the
continuous position updating. At the programmed rate, the tracker will be connected only for the time needed
for sending the position point. This function is very useful if combined with the I-Scout web server as it allows
to display the detected positions by every station connected to internet.
Programming
To use this function, it is necessary to set the GPRS communication parameters, and then enable the
function setting the rate for cyclic GPRS connection.
1) Set the GPRS parameters Sending an SMS command (wgprs)
Using the provided software
2) Enable the cyclic GPRS connection setting the rate Using the provided software
Position Data and Events Recording
The tracker allows to record:
the detected events automatically without setting the recording •
the position data to review the track afterwords, if the recording was previously set •
The tracker can records approx. 14,800 position points and approx. 1,900 events.
When an event occurs, the tracker detects it and start to record in the Event LOG.