Micromod Micro-DCI: EP1000A E-Port - Manual (Page 41)

EP1000A E-Port Instruction Manual
Configuration Parameters 37
You should use one of the following address ranges, that have been reserved for use by isolated networks
if you are creating an isolated network. The first range will be used for all of the examples in the documen-
tation.
10.0.0.0 to 10.255.255.255 Class A
172.16.0.0 to 172.31.255.255 Class B
192.168.0.0 to 192.168.255.255 Class C
For example:
• Set Your PC’s Network Adapter Card IP Address to 10.1.1.10 (only change the Network
Adapter Card, do not change your Dial-Up Adapter settings)
• Set the IP address of the E-Port to 10.1.1.11
• Set the network mask for both the PC network adapter and the E-Port board to 255.255.255.0
3.3 Network Management
3.3.1 Use Super32 to Find an Instrument’s E-Port
1. Browse the tree list to find the instrument for which you want E-Port information.
2. Click on the icon for an instrument to select it.
3. The pane on the right side of the window displays data about the instrument. The Network Port
item shows the E-Port name.
Figure 3-6. Initial Super32 Window