Micromod Micro-DCI: EP1000A E-Port - Manual (Page 35)

EP1000A E-Port Instruction Manual
Configuration Parameters 31
3.0 Micro-DCI Software Configuration
3.1 Creating an E-Port Network with Super32
An E-Port Unit is a network interface device used to facilitate data communication between MicroMod
Automation controllers and Communications Services nodes on an E-Port type network. Before you can
use E-Port units, you must have an E-Port network available. E-Port communication is only available on
Version 4.1 (or later) of the Micro-DCI Communication Services software.
To create an E-Port network:
1. From the Windows task bar, select the sequence Start > Programs > MicroMod Automation
> Micro-DCI Communications Services > Super32.
2. Right-click on the Communications Services node on which the new network is to be created.
A menu is displayed.
3. Select the Add a new network option on the menu. The Network Wizard window ( Figure 3-1 )
is displayed.
Figure 3-1. Network Wizard Initial Window