Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 5)

ZM4 Instruction Manual 9R87-B June 2012
5
Safety Warnings
The table below defines the safety symbols, signal words and corresponding
safety messages used in the manual to identify potential hazards and are
intended to warn persons about hazards that could result in personal injury or
equipment damage.
This is the Safety Alert symbol. This symbol indicates a WARNING. Warnings
alert you to actions that can cause personal injury or pose a physical threat.
Please read these carefully.
This is the Safety Glasses symbol. This symbol indicates that you must wear
approved safety glasses during the task.
This is the Safety Gloves symbol. This symbol indicates that you must wear
approved safety gloves during the task.
Indicates a potentially hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
Indicates information essential for proper product installation,
operation or maintenance.
Information in this document is subject to change without notice. Check the
Meriam web site (
www.meriam.com ) for the latest manual revision.