Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 14)

ZM4 Instruction Manual 9R87-B June 2012
14
Date & Time Setup
Figure 9: Date & Time Setup Display
Use the arrow keys to highlight the appropriate field. Set the correct value
using the Adaptive Interface Wheel.
To save the new date & time press the Save key. All the fields will
temporarily display dashes while the new values are stored. To cancel
without saving, press the Exit key.
NOTE: The seconds field (ss) is not adjustable. The time can only be
adjusted to the nearest minute. When the Save key is pressed the seconds
are set to zero.