Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 12)

ZM4 Instruction Manual 9R87-B June 2012
12
Data Logging Setup
Figure 7: Data Logging Setup Display
Reference Function
Start Start the data log using the current settings.
Stop Stop or cancel the running data log.
Interval Adjust the data log interval time between 1
and 60 seconds. Active setting shown on
right.
Duration Adjust the data log duration time between 1
minute and 24 hours. Active setting shown
on right.
Log Name Adjust the name of the data log. Press right
arrow to bring up menu to enter name for
data log session.
Status Status of the data log session. Active status
displayed on right. Press right arrow to bring
up detailed information (shown in Fig. 8).