Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 18)

ZM4 Instruction Manual 9R87-B June 2012
18
Damping Setup
Figure 13: Damping Setup Display
Use the Type key to change the Damping Type. The options are a follows:
1) None. The measured value is not filtered or damped.
2) Exp(exponential), which uses a traditional damping algorithm with
response delays associated with the Damping Rate.
3) Smart, which employs a smart damping algorithm to produce and
instant response to a step change. After the step change it uses the
Damping Rate to damp the measurement exactly as in exponential
damping.
Use the arrow keys and the Adaptive Interface Wheel to set the Damping
Rate in seconds. The value can be adjusted between 0 and 32 seconds.
Press the Exit key to return to the main Pressure Sensor Setup menu.