Meriam M4 Series Precision Calibrator Data Logger Manual User Manual
Page 28
ZM4 Instruction Manual 9R87-B
June 2012
28
Accessing SD Card
To install the SD™ card simply insert the card in the slot and press down
until you hear a click. The card has only one orientation for correct alignment.
Please make sure you are inserting a SANDISK P/N SDSDB-2048-A11 or
equivalent. Further details on the card are provided under the specification
section.
NOTE:
There is a Lock located on the side of the SD™ card. When the Lock is
pressed down information can only be read from the card. To write or save
information to the card make sure it is Unlocked before installing.
Figure 23: Accessing SD Card