Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 35)

ZM4 Instruction Manual 9R87-B June 2012
35
Specifications
Environmental Conditions:
Calibrated: -4 to 122°F (-20 to 50°C)
Storage: -40 to 140°F (-40 to 60°C)
Humidity: 5 – 95%, non-condensing
Altitude: Operating 2000 Meters, Storage 1000 Meters
Safety:
EMC: EN 61326-1, Class A
IEC 61010-1, CAT-1 Voltage Protection
Environmental: RoHS, WEEE, Pollution Degree 2
Shock: 1 Meter Drop Test per IEC 61010-1
This instrument is intended for a temporary connection to industrial low-
voltage current loops and not intended for a permanent connection.
“This product complies with the essential requirements of the European
Directives for Low Voltage, EMC, RoHS, & WEE and carries the CE marking
accordingly”.
Cleaning: Clean product with mild soap and damp rag. To avoid damaging
the plastic lens and case do not use solvents or abrasive cleansers.
Product Features: sensor zero and tare, field recalibration with password
protection, sensor damping (exponential & smart), running
minimum/maximum, units select, flexible data logging, adjustable power off
timer, adjustable backlight off timer, adjustable display contrast and backlight
brightness, battery monitor, clock/calendar, field reprogrammable, keypad
with adaptive interface wheel for alpha-numeric selection and menu
navigation
Engineering Units: (32 selectable) PSI, inW20C, inW4C, inW60F, ftW20C,
ftW4C, ftW60F, mmW20C, mmW4C, mmW60F, cmW20C, cmW4C,
cmW60F, mW20C, mW4C, mW60F, inHg0C, mHg0C, cmHg0C, mmHg0C,
torr, kg/cm2, kg/m2, Pa, hPa, kPa, MPa, Bar, mBar, ATM, oz/in2, lb/ft2