Meriam M4 Series Precision Calibrator Data Logger Manual - Manual (Page 21)

ZM4 Instruction Manual 9R87-B June 2012
21
Units Selection Setup
Figure 16: Pressure Units Selection Display
This selection list shows which pressure units are displayed when the
Units key on the M4 is pressed. The units with the check mark to the
right will be displayed. Those without the check mark will be skipped.
To enable or disable a pressure unit, use the Adaptive Interface Wheel to
scroll to the desired unit. Press either arrow key to check or uncheck the
unit. The arrow keys will toggle the unit between checked and
unchecked.
To enable all 32 units press the All function key. To uncheck all the units
press the Clear key.
Press Exit to return to the main Pressure Sensor Setup menu.
NOTE: At least one pressure unit must be selected before exiting.