Meriam M4 Series Precision Calibrator Data Logger Manual User Manual

Page 23

Text mode
Original mode

ZM4 Instruction Manual 9R87-B

June 2012

Volts/mA Mode Setup

Figure 18: Volts/mA Mode Select Display

Reference

Function

V Measure

Selects the voltage measure mode.

I Measure

Selects the current measure mode.

24V Source

Selects the 24V loop source mode.

V Source

Selects the voltage source mode. Brings up
menu (described on following page) to select
manual or automatic voltage simulation.

I Source

Selects the current source mode. Brings up
menu (described on following page) to select
manual or automatic current simulation.

I Sink

Selects the current sink mode. Brings up
menu (described on following page) to select
manual or automatic current sink. This is
also known as transmitter simulation mode.