Magnum Venus Plastech HIS SUPERCHARGED - Manual (Page 8)

SUPERCHARGED H.I.S.™
Priming the Catalyst Pump
1. Carefully fill 2 gallon catalyst jug with MEKP (never dilute catalyst for MVP
systems.) Check for, and remove air voids in feed line.
2. Remove top quick pin from upper slave arm.
3. With steady even strokes, slowly hand pump the catalyst pump using priming
knob. Stop hand priming when steady stream of catalyst pours from the gun with
no air in the stream. (See Fig. 3A)
Fig. 3A
See catalyst manufacturer for proper MEKP formulation for
your particular operation.
NOTE
Always dispose of the waste catalyst according to the
manufacturer’s recommended procedure.
CAUTION
4
Chapter
3 33
33