Magnum Venus Plastech HIS SUPERCHARGED - Manual (Page 15)

SUPERCHARGED H.I.S.™
5. Flush gun and wipe gun block clean.
6. Check and fill resin pump power head oiler if necessary.
7. Drain water trap located on air manifold.
8. Check pump packing for leaks. Resin leaking into the pump casting
oil reservoir indicates the packings need replacement.
9. Turn flush valve located on the manifold to off position.
10. Relieve flush tank pressure by lifting up on the lever or ring of the relief
valve located on top of the flush tank.
SHUT-DOWN PROCEDURE
11
Fig. 5B