Magnum Venus Plastech HIS SUPERCHARGED - Manual (Page 19)

SUPERCHARGED H.I.S.™
1. Grease accumulator nipple threads and O-ring with MVP white grease.
Check O-ring for damage and wear. Replace if necessary.
2. Place poly ball on top of nipple.
3. Screw accumulator body onto nipple. Hand tight only.
4. Grease threads of the filter tank.
5. Place filter core into filter screen.
6. Place screen and core into tank
7. Screw the filter tank, core and screen into bottom of filter body. Hand tight
only.
Reassembly of Resin Accumulator
and Resin Filter
15
NOTE
The pin on the core must enter the filter screen.
NOTE
The pin end of the core and screen goes into the tank first.
The core and screen will rest against the spring in the
bottom of the filter tank.
Chapter
7 77
77