Magnum Venus Plastech HIS SUPERCHARGED - Manual (Page 4)

SUPERCHARGED H.I.S.™
H.I.S. SUPERCHARGED Quick List
1. Check all fittings for proper connection.
2. Fill solvent tank.
3. Prime the catalyst pump.
4. Prime the resin pump.
5. Relieve fluid pressure from the unit by opening the ball valve under
the resin filter.
6. Insert the charging hose onto the resin accumulator.
7. Close the ball valve under the resin filter.
8. Adjust for proper spray pattern.
NOTE: These instructions include resin and catalyst pressurization procedures.
To avoid equipment malfunction or possible injury, please follow these
instructions. If you have any questions, please contact our Technical Service
Department at 800-448-6035.
Chapter
1 11
11