Magnum Venus Plastech INNOVATOR II CONTROL UNIT - Manual (Page 31)

INSTALATION/OPERATIONS MANUAL
INNOVATOR II
MAGNUM VENUS PLASTECH REV 1.40
MAY 2012 PAGE 31
RGA V01 RESIN GEL ALARM VALVE

In the on position, supplies RGA circuit.

In the off position, removes supply from RGA circuit.

Triggered by INJECT PB 01 or REMOTE INJECTION SEQUENCE START VALVE (V01)
RGA V02 TIMER VALVE

In the on position, removes supply the RGA circuit.

In the off position, supplies the RGA circuit.

Triggered by RESIN GEL ALARM VALVE (RGA V01)
RGA V03 COUNTER CIRCUIT VALVE

In the on position, supplies the RGA circuit and counter circuit signal.

In the off position, removes supply to the RGA circuit and counter circuit signal.

Triggered by powerhead pulse signals.
S01 START UP SAFETY VALVE

In the on position, initiates the stop circuit and resets all valves.

Triggered by, main air pressure going from off to on.
S02 MPG LOW PRESSURE RELAY VALVE

In the on position, supplies signals to MPG GUN OVERIDE (V14) and MPG PUMP OVERIDE (V15).

In the off position removes signals from MPG GUN OVERIDE (V14) and MPG PUMP OVERIDE (V15).

Triggered by venting of the MPG block on the gun.
S03 CE NORM GUARD INTERLOCK VALVE

In the off position, supplies signal to stop circuit.

Triggered by opening the CE NORM guard.
S04 CATAYLST OVER PRESSURE VALVE

In the off position, supplies signal to stop circuit.

Triggered by venting of the Catalyst Overpressure block on the gun.