Liquid Controls MA4 Meter - Manual (Page 19)

19
Disassembling the Meter
4. Hold a spare displacement rotor gear between the
right displacement rotor gear and the blocking rotor
gear to keep them from turning (if unavailable, use a
shop rag between gear teeth). Use the rotor gear
wrench or socket to remove the right displacement
rotor screw and washer.
5. Hold the spare gear between the left displacement
rotor gear and blocking rotor gear. Use the rotor gear
wrench or socket to remove the screw and the
packing gland driver held by the screw.
6. Hold the spare gear between the right displacement
rotor gear and the blocking rotor gear. Use the rotor
gear wrench or socket to remove the left
displacement rotor gear screw and washer.