Controlled Products Systems Group HCT5011O3-08 - Manual (Page 4)

MOTOR - 120 Vac 4.8 Amp 1/2 HP instant reversing parking gate
Leeson Motor
GEAR BOX - 40 to 1 ratio, lubrication by oil bath gives smooth,
quiet operation and features positive gate locking.
NOISE ISOLATOR - Heavy duty rubber attachments isolate
vibration, absorb shock and eliminate noise.
TWO WAY REVERSING SENSOR - Can be set for close/open
cycles. While closing, if the gate hits an object it reverses; while
opening, if it hits an object it stops.
ENTRAPMENT ALARM SYSTEM - Alarm activates anytime the
moving gate is physically stopped by an unwanted object.
MODULAR ELECTRONIC CONTROL BOARD - All electronic parts are on a single board.
BALL BEARING SUPPORTS - All wear points run on full ball bearing supports for a long, quiet life.
TROLLEY ASSEMBLY - Chain drive trolley assembly operates on 6 UHMW wheels to eliminate
noise, shock and vibration.
FINISHING - Metal parts are gold-zinc plated and/or powder coated for rust-proof purposes.
MANUAL RELEASE - In case of power failure, it can be easily disconnected by a security key.
F E A T U R E S A N D S P E C I F I C A T I O N S
CONTINUOUS CYCLE 1/2 HP – 120 Vac
Use warning sign on front of gate
to prevent injury to children.
240 LBS. MAX. PULL 1PH – 60HZ – 4.8 AMPS
COMMERCIAL GATE OPERATOR, CLASS II, III, IV WEIGHT 123 LBS
141"
22.01"
8.25"
4"
18.875"
8.36"
VARIABLE OPERATING LENGTHS
Gate Height Operator Length
8 ft. Gate 141 in.
10 ft. Gate 165 in.
12 ft. Gate 189 in.
2