Controlled Products Systems Group HCT5011O3-08 - Manual (Page 28)

Trolley will automatically re-engage when power is restored and run command is
given. When the cylinder lock is in the locked position, the release ring will not
disengage. If the cylinder lock is in the unlocked position, the release ring will always
be accessible to disengage.
M A N U A L R E L E A S E
STEP 1
Insert key and turn to unlock position.
STEP 2
Pull down the release ring.
Lift the gate up.
STEP 3
Lift the gate up until fully open.
STEP 4
WARNING: To reduce the risk of SERIOUS INJURY or DEATH from a
falling gate:
• If possible, use manual release to disengage trolley ONLY when gate
is CLOSED. Weak or broken springs or unbalanced gate could result
in an open gate falling rapidly and/or unexpectedly.
• NEVER use emergency release unless gateway is clear of persons
and obstructions.
26