CTI Products MCN RCD System Planner - Manual (Page 30)

Designing an MCN system
Page 26 MCN Comparator Display System Planner
5.2 MCN System Components
Below is a list of MCN modules and accessories available to build your comparator display system.
COMPONENT
CTI Products
PART NUMBER
Comparator I/O Modules
Comparator Interface Module (CIB)
For DIGITAC, Spectra-TAC and other parallel I/O comparators. S2-60442
ASTRO-TAC Interface Module (AIB)
(Availible only through Motorola as a CDN6119)
Operator Interface Modules
Input/Output Interface Module (IIB)
For connection to CEBs S2-60433
Host Computer Interface Module (HIB) and
MCN Remote Comparator Display DOS Software S1-60424
Transmitter Steering Interface Modules
Transmitter Steering Interface Module (TIB)
(Works with CIB and HIB modules)
(Contact CTI Products for system design) S2-60451
System Extender Modules
MCN System Extender Module (EXB) 78K
(Contact CTI Products for system design) S1-60602
MCN System Extender Module (EXB) 1.25 M
(Contact CTI Products for availability and system design) S1-60603
Router and Repeater Modules
Routers & Repeaters
(Configurations vary depending on application.
Contact CTI Products, Inc for system design.)
Modems
Modem V.34 28.8 Kb Dial-Up 99-10962
Standard Length Network Cables, Terminators, Couplers
9 inch cable S2-60438
3 ft. cable 89-10732
10 ft. cable 89-10712
25 ft. cable 89-10835
100 ft. cable 89-10836
100 ft. Plenum cable S2-60439
200 ft. cable S2-60534
200 ft. Plenum cable S2-60535
400 ft. cable S2-60536
400 ft. Plenum cable S2-60537
1000 ft. cable S2-60538
1000 ft. Plenum cable S2-60539
Terminator (1 each) S2-60318
Cable Coupler 27-10841