CTI Products MCN RCD System Planner - Manual (Page 21)

Section 4. System Installation Options
MCN Comparator Display System Planner Page 17
4.1.2 DIGITAC Bracket and Cable Rear Mount
The DIGITAC rear mount bracket and cable provides a quick and easy way to mount the CIB and
connect it to the DIGITAC without extra cables and punch blocks. The CIB module I/O connector has
a pinout that matches the DIGITAC P805 connector. The rear mount includes a ribbon “T” connector.
One connector plugs into P805, another connects to the CIB module, and a third is a female 50-pin
connector for external comparator I/O connections. The DIGITAC rear mount kit is shown below:
DIGITAC
CIB
CIB
DIGITAC
P805 P806
CIB DIGITAC MTG. BRKT.
25 50
1 26
2.181
MOUNTS WITH 4 SCREWS FEMALE CONNECTOR FOR
EXTERNAL CONNECTIONS
RIBBON CABLE
NOTE ADDITIONAL CLEARANCE
REQUIRED BEHIND DIGITAC WHEN
INSTALLING CIB AND BRACKET.
CA-80149-100
NETWORK IN
NETWORK OUT
P/S
Figure 8 - Digitac Bracket and Ribbon Cable