Characters 5,6 - parameter number, Characters 7 through 8 - data, Characters 9,10- data – CONTREX ML-TRIM User Manual
Page 93: Character 11 - data format, Character 12 - etx
3 - 59
Characters 5,6 - Parameter Number:
These characters should always be “0”.
Characters 7 through 8 - DATA:
These characters should always be “0”.
Characters 9,10- DATA:
01
F–Stop
02
R–Stop
03
Run
04
Enable Master Mode
05
Enable Follower Mode
06
Not in Use
07
Not in Use
08
Not in Use
09
Not in Use
10
Enable Setpoint 1/3
11
Enable Setpoint 2/4
12
Not in Use
13
Not in Use
14
Not in Use
15
Not in Use
Character 11 - Data Format:
This character should always be “0”.
Character 12 - ETX:
Always use the ASCII “ETX” character to terminate the character string.