beautypg.com

Special key sequences lockout, Copy, Use default – Clear-Com WTR-670 User Manual

Page 35: Factory default

background image

Special Key Sequences

Lockout

Press [UP]+[DOWN] for 3 seconds to lock or unlock the

base station. Pressing [MENU] will still function to view

screens, but [SET] will no longer start any editing. Scan,

First use, Factory default are no longer accessible. The in-

tercom front panel 2-wire/4-wire selection is also locked

into place. A padlock icon will be displayed on the second

line of the display to the far left as an indication that the

base station is locked out.

Copy

Press [SET]+[DOWN] for 3 seconds to copy any cur-

rently displayed group to a user-programmable group.

Copy can be done from the group/channel select,

group/frequency select, or frequency edit screen. Once

pressed, the words, “Copy to” are displayed on the screen

with the first empty user-programmable group flashing. If

all the user-programmed groups were full, than the first

programable group is displayed. The [UP] or [DOWN]

buttons may be used to select a different user-programmable

group if desired. Pressing [SET] pastes frequencies/chan-

nels to the group and take the user to the frequency edit

screen with "Tx” flashing.

1

st

Use Default

Press [MENU] while turning on the base station to enter

the 1

st

use default setup screen. This places the unit on

group 01A with the four receivers set to channels 1- 4 of

the group. Any user-programmed frequencies that had

been entered previously are retained. If lockout had

been activated, the beltpack comes up where it was last

left regardless of [MENU] being pressed on power-up.

Factory Default

Pressing all four buttons [MENU]+[SET]+[UP]+[DOWN]

at the same time for 3 seconds places the unit on group

01A with the four receivers set to channels 1 – 4 of that

group. This is just like base station 1

st

use default, except

that all user-programmed frequencies that had been en-

tered previously are erased. This function may take sev-

eral seconds. If lockout had been activated, the beltpack

comes up where it was last left regardless of these four

keys being pressed.

6-10

This manual is related to the following products: