Section 2, Equipment setup, Base station setup – Clear-Com HME DX121 User Manual
Page 12: Basic base station setup
8
BASE STATION SETUP
Basic Base Station Setup
The following description is for a basic, stand-alone DX121 One-to-One Wireless Intercom System setup.
Intercom headset, 4-Wire intercom and relay connections are described on page 22.
Set up the Base Station as follows:
Rear Panel
Front Panel
Step 1. Mount antennas -
Mount the two enclosed antennas on the antenna connectors on the rear panel of the Base Station.
Position the antennas at an approximate 90° angle. Turn the sleeve on each of the antenna connectors
clockwise to tighten it securely in place.
SECTION 2. EQUIPMENT SETUP
Approximate
90
° angle
12-14 VDC
power connector
Antenna connectors
Power light
Power button
See also other documents in the category Clear-Com Accessories communication:
- CS-702 (36 pages)
- MS-702 (32 pages)
- MS-704 (40 pages)
- RCS-2700 (54 pages)
- SB-704 (42 pages)
- RS-701 (2 pages)
- RS-702 (3 pages)
- RS-601 (No longer available) (60 pages)
- RS-603 (No longer available) (58 pages)
- RS-601 (No longer available) (46 pages)
- RS-602 (No longer available) (56 pages)
- PK-7 (14 pages)
- PS-702 (28 pages)
- PS-704 (34 pages)
- RM-702 (42 pages)
- RM-704 (46 pages)
- HB-702 (24 pages)
- KB-701 (24 pages)
- KB-702 (32 pages)
- V-BOX (2 pages)
- TW-12C (20 pages)
- IF4W4 (20 pages)
- EF-701M (62 pages)
- TW-47 (30 pages)
- TWC-701 (18 pages)
- PRC-2 (24 pages)
- PTX-3 (32 pages)
- AB-120 (35 pages)
- AX-704 (30 pages)
- FL-7 (16 pages)
- WP-2 (1 page)
- WP-6 (1 page)
- HMS-4X (2 pages)
- HMS-4X (2 pages)
- HMS-4X (143 pages)
- HMS-4X (197 pages)
- HRM-4X (2 pages)
- Eclipse HX-PiCo (86 pages)
- Eclipse HX-PiCo (4 pages)
- Eclipse HX-PiCo (70 pages)
- Eclipse HX-Delta (2 pages)
- Eclipse HX-PiCo (290 pages)
- Eclipse HX-Delta (143 pages)
- Eclipse HX-Median (145 pages)
- Eclipse HX-PiCo (186 pages)