Clear-Com V12PDDXY User Manual
Xlr-7m option, Fitting an xlr-7m headset connector assembly, Fitting instructions for xlr-7m pcb assembly
This manual is related to the following products:
Table of contents
Document Outline
- Fitting Instructions
- Fitting Instructions for XLR-7M PCB Assembly
- Tools Required
- V-Series XLR-7M Option .
- Step 2
- Step 3
- Step 4
- Step 6
- Step 7
- V-Series XLR-7M Option .
- . V-Series XLR-7M Option
- V-Series XLR-7M Option .
- . V-Series XLR-7M Option
- V- Series XLR-7M Option .
- Warning: The grub screw in the XLR connector has a left hand thread; when this is turned clockwise the grub screw will move out of the connector and lock with the black plastic moulding. Do not over tighten the grub screw as this is very difficult to ...
- . V-Series XLR-7M Option
- Step 14
- Step 1
- Step 3
- Step 4
- . V-Series XLR-7M Option
- Note: Ensure that no cables are trapped before attempting to refit the screws.
- V-Series XLR-7M Option .
- Warning: The grub screw in the XLR connector has a left hand thread; when this is turned clockwise the grub screw will move out of the connector and lock with the black plastic moulding. Do not over tighten the grub screw as this is very difficult to ...
- Tools Required