Clear-Com V12PDDXY - Manual (Page 13)

. V-Series XLR-7M Option
Step 2
The Headset Connector Assembly secured to the mounting block by two
pozidrive screws at the top of the front panel assembly.
Figure 19: Desktop Front Panel Assembly with XLR-4M Fitted
• Remove the audio card cable.
• Remove the two pozidrive screws securing the Headset Connector
Assembly to the mounting block.
• Remove the Headset Connector Assembly.
Step 3
Before fitting the XLR-7M Headset Connector Assembly it should be checked to
ensure that the PCB is aligned so that the pozidrive screw heads will clear the PCB
when they are in place.
If the assembly requires adjustment please refer to Appendix A.
Note: The grubscrew should not be loose when fitting the Headset Connector
Assembly to the mounting block.
13 PN 810405Z Rev. C