Clear-Com V12PDDXY - Manual (Page 12)

V- Series XLR-7M Option .
Fitting the XLR-7M Headset Connector Assembly to Desktop Panels
Before fitting the XLR-7M Headset Connector Assembly the panel must be
completely disconnected from any cabling. Place the panel on a clear
workspace suitable for antistatic precautions.
Step 1
Note: Record whether the panel has been build for desktop use or for
attachment to a wall to ensure the front panel is replaced in the correct
orientation.
Remove the eight countersunk screws holding the front of the panel on. The
countersunk screws are located on the ends of the panel, four on each end
(Figure 18).
Figure 18: Desktop Panel Retaining Screws
Remove and retain all the screws and remove the front panel assembly. The
cables connecting the front panel electronics to the main PCB are long
enough to allow the panel front to be removed without having to unplug any of
the cables.
PN 810405Z Rev. C 12 .