Clear-Com V12PDDXY - Manual (Page 4)

V-Series XLR-7M Option .
Step 5
Remove the four countersunk screws from the bottom of the chassis (located along
the bottom front edge).
Figure 5: Screws on Bottom of Chassis
Pull the front panel assembly away from the chassis to give access to the connectors
and cables.
Step 6
Disconnect the microphone and main board connection cables from the Front Panel
Audio Card. Disconnect the cable from the Headset Connector Assembly.
Figure 6: Cable Removal from Audio Card
PN 810405Z Rev. C 4 .