Burkert Type 8055 - Manual (Page 14)

SE 56
14
210_EN_BU_4_3_5X.d
oc
T
T T
OPERATION STAGE ON INPUT 1 AND 2 (BATCH FUNCTION)
Start batch on remote input 1 stop from output
selection formula 00 o 01 from remote input 2
Block totalizer from remote input 1 start batch from
remote input 2
Block and reset totalize from remote input 1
start batch from remote input 2 consent mode
to batch enable
Necessary conditions for enabling the function
POS. 5.9 ENABLED
POS. 6.1 or 6.4 on AND BATCH
POS. 5.10 function of formula selection
00/01 assigned to input 2 (optional)
ENABLED
The block of the totalizer always
determines the interruption of the
batch. Exciting
again the input 2 is possible to get 2
results:
1) T< 1Sec = restart interrupted
batch
2) T between 1 e 4 Sec = reset
interrupted batch. N.B.: will be
necessary to give a new start
impulse to the input 2 (T< 1Sec)
to begin a new batch
Necessary conditions for enabling the
function
q POS. 5.6 (Block totalize) ENABLE
q POS. 6.1 OR 6.4 on END BATCH
q POS. 5.10 funzione di dosaggio
attribuita ad ingresso 2
(optional) ENABLE
q POS. 5.2 (P+) ENABLE
The block of the totalizer always determines
the stop of batching. With the T2 reset
function enabled on the input 1 descent front,
the batch totalizer in use goes to zero.
Therefore both the presence of the consent or
a new pulse on the input 2 will determine
The start of a new batch
Necessary conditions for enabling the function
q POS. 5.6 (Block totalizer) ABILITATO
q POS. 5.10 function of batch assigned to
input 2 (optional) ENABLE
q POS. 12.7 (consent mode) ENABLE
q POS. 5.2 (P+) ENABLE
3-40 V
0-1,5 V
Start
Opening
valve
Closing
valve
Opening
valve
Closing
valve
BATCH FORMULA 00 BATCH FORMULA 01
BATCH FORMULA 00
BATCH FORMULA 01
3-40 V
INPUT 2
OUTPUT
INPUT 1
3-40 V
0-1,5 V
Start Start
Opening
valve
Closing
valve
Opening
valve
Closing
valve
NEW BATCH
RESTART INTERRUPTED
BATCH
O
UTPUT
OUTPUT
INPUT 2
INPUT 2
INPUT 1
T<1 Sec.
T comprise tar 1 e 4 Sec.
3-40 V
0-1,5 V
Start
RESET
T<1 Sec.
Start
Opening
valve
Closing
valve
Opening
valve
Closing
valve
INTERRUPTED BATCH
0-1,5 V
3-40 V
BLOCK
0-1,5 V
3-40 V
Start
INPUT 2
Opening
valve
Closing
valve
Opening
valve
Closing
valve
0-1,5 V
3-40 V
BLOCK RESET T2
INPUT 1
OUTP
UT
INTERRUPTED BATCH
NEW BATCH INTERRUPTED BATCH