Burkert Type 8695 - Manual (Page 19)

19
Electricalinstallation/displayelements
9.6 Display elements as-interface
note!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶ When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the connection hous-
ing (see “Fig. 10: Open control head”).
ye gn
Bot To
p
To
p
Bot
gn ye
Valve LED yellow
(pilot valve)
Bus LED red
Bus LED green
Status LED yellow
End position LED yellow
End position LED green
Jumper for
assignment
of end
position
LEDs
Fig. 14: Display Elements AS-Interface
note!
damage or malfunction due to penetration of dirt and humidity.
▶ To observe protection class IP65 / IP67, screw the transparent
cap in all the way.
Bus led
(green) Bus led
(red)
off off POWER OFF
off on
No data traffic (expired Watch Dog at
slave address does not equal 0)
on off OK
flashing on Slave address equals 0
off flashing
Sensor supply overloaded or external
reset
Tab. 6: LED Status display bus status
led state
Status LED yellow
flashing Teach function is running
flickers Puck PCB not available
End position LED green on End position bottom 3)
End position LED yellow on End position top 3)
LED Valve yellow on Pilot valve is actuated
Tab. 7: Display elements AS-Interface
3)
Color setting ex works. Can be set via jumper (see “Fig. 14”).
english
Type 8695