Burkert Type 6106 - Manual (Page 5)

5
Authorized use
2. AUTHORIZED USE
Unauthorized use of the device Type 6106 may be dangerous
to people, nearby equipment and the environment.
• The device is used exclusively as a solenoid valve for media per-
mitted according to data sheet and for use in Group II Category
2 G and temperature class T4, T5 or T6 (see specifications on
the approval plate).
• The applied protection class is the intrinsic safety EX “i” for coils
with circular plug connection, rectangular plug connection with
or without protective collar as well as connection by pressed-in
single wires and device socket connection in accordance with
DIN 43650 Form C.
• The faultless and reliable operation of the system assumes cor-
rect transportation, correct storage and installation as well as
careful operation and maintenance. Any other use is regarded as
unauthorized. Bürkert is not liable for any resulting damage. The
user alone bears the risk.
• Only use the device for its intended purpose.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
2.2. EX approval
The EX approval is only valid if the modules and components autho-
rized by Bürkert are used as described in these operating instructions.
Type 6106 may be used only in combination with the additional com-
ponents released by Bürkert, otherwise the EX approval will be voided!
If any unauthorized changes are made to the device, modules or com-
ponents, the EX approval will also be voided.
english
PTB 01 ATEX 2175