Burkert Type 6106 - Manual (Page 13)

13
Maintenance, Troubleshooting
7.2. Installation of Type 6106
Any installation position.
Preferably with magnet system face up.
1. Clean pipelines.
2. Any installation position
→
Preferential direction with actuator face up.
3. Connect dirt trap upstream
→
Observe direction of flow!
4. Fluidic connection.
5. Install - Always connect protective conductor!
7.3. Types of connection
Rectangular
connector with or
without protective
collar
2 single wires Circular
connector
Appliance socket
connection face
up in accordance
with DIN 43650
Form C
8. MAINTENANCE,
TROUBLESHOOTING
8.1. Safety instructions
WARNING!
Danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged
devices or persons, there is a danger of explosion in the EX area.
• Using suitable measures, ensure that no electrostatic charges
can occur in the EX area.
• Clean the device surface by gently wiping it with a damp or anti-
static cloth only.
Risk of injury from improper servicing, repairs and
maintenance!
• The device may be serviced and maintained by authorized techni-
cians only and with the appropriate tools!
• The unit may be repaired by the manufacturer only!
8.2. Maintenance work
The devices are maintenance-free when operated under the condi-
tions described in this manual.
english
PTB 01 ATEX 2175