Burkert Type 2036 - Manual (Page 6)

6
Authorizeduse
Type 2036
2. auThOrizeD use
improper use of the robolux multiway diaphragm Valve
type 2036 may represent a hazard to persons, neighboring
equipment and the environment.
The device is designed for controlling the flow-rate of liquid media.
▶ The approved data, the operating conditions and conditions of use
specified in the contract documents, operating instructions and on
the type label are to be observed during use. The designated areas
of application are specified in chapter "5. Product description".
▶ Use the device only in conjunction with third-party devices and
components recommended and authorized by Bürkert.
▶ Correct transportation, storage, and installation, as well as care-
ful use and maintenance are essential for reliable and faultless
operation.
▶ Use the device only as intended.
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
3. Basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
• Contingencies and events which may arise during the installation,
operation, and maintenance of the devices.
• Local safety regulations – the operator is responsible for observing
these regulations, also in relation to the installation personnel.
Danger!
risk of injury from high pressure in the equipment/device.
▶ Before working on equipment or device, switch off the pressure
and deaerate/drain lines.
risk of electric shock.
▶ Before reaching into the device, switch off the power supply
and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Warning!
risk of injury when opening the actuator.
The actuator contains tensioned springs. If the actuator is opened,
injuries may be caused by the springs jumping out!
▶ The actuator must not be opened.
english