Burkert Type 2036 - Manual (Page 10)

10
Productdescription
Type 2036
The diaphragm valves can be used for a large variety of control
functions. Accordingly, there is a very wide range of configuration
variations. Depending on the function the valve can have one, two or
three actuators.
Pneumati-
cally operated
actuator
Diaphragm
Valve body
Fig. 2: Diaphragm valve, structure and description
5.3. Options
The following options are available for controlling the actuators and
feedback of the different switching positions.
• Feedback head Type 8685 with up to four position feedback indi-
cators in the versions 24 V DC, AS-Interface and EExi.
• Control head Type 8686 with up to two pilot valves and position
indicators in the versions 24 V DC, AS-Interface and EExi.
5.4. Valve self-draining
The way in which self-draining takes place varies according to the
valve type. It is very important to know the flow paths for each indi-
vidual valve before the port / connection (marked with A, B, C or D)
for draining is selected.
Contact your Bürkert sales office or our Sales Center, email:
[email protected] if you have any queries.
english