Burkert Type 1062 - Manual (Page 28)

28
Installationandwiring
Type 1062
into the notches provided for this purpose in the bottom of the
housing, as shown in „Fig. 6“ below:
Fig. 6: Final position of the cable
8.2.1 Wiring a mechanical contact version
note
on a mechanical contact version, the used contact is not
voltage free.
• Do not connect the unused contact in order to obviate any danger
of malfunction.
+ -
NO NC
+
-
8 A max.
+ -
1062
Green light (open
valve detection)
Orange light (volt-
age present)
Power supply 1)
Fuse suitable for
the max. load
Load
Fig. 7: Wiring of the contact when normally open (NO) on a
mechanical contact version, valve open detection
1) Use a power supply that matches the data shown on the name plate of the
1062
english