Brooks Instrument 5851EM - Manual (Page 17)

2-3
Brooks ® Models 5965, 5851EM
Section 2 Installation Installation and Operation Manual
X-TMF-5965-5851EM-MFC-eng
Part Number: 541B122AAG
September, 2009
2-5 Transit Precautions
To safeguard the instrument against transportation damage, it is
recommended to keep the instrument in its factory container until ready for
installation.
2-6 Removal from Storage
Upon removal from storage, a visual inspection should be conducted to
verify the condition of the equipment is “as received”. lf the equipment has
been in storage in conditions in excess of those recommended, the device
should be subjected to a pneumatic pressure test in accordance with
applicable vessel codes. Note: lf the cleanliness of this device is critical,
service should be performed by the factory or one of the authorized
service centers.
2-7 Gas Connections
Prior to installation, make certain all piping is clean and free of
obstructions. lnstall the piping in such a manner that permits easy access
to the instrument if it needs to be removed for cleaning or test bench
troubleshooting.