Dynasonics 901 Series Enhanced Ultrasonic Flow Meter - Manual (Page 29)

Rev.
04/02 -28- D901/M
The RESET key is used for generating a system reset or
to reset the accumulated (totalized) flow. Press the
RESET button from the ENTER Mode. A choice is then
made to :
RESET Reset the system
VOL. MULT Press VOL PULSE to
re-set the totalizer to
zero.
If the RESET key is pressed again, all configuration
constants will return to default values.
If the VOL. PULSE key is pressed, the accumulated flow
will be erased and the display will return to zero.
In RUN Mode, pressing the decimal point once will
suspend totalizer accumulation. Pressing the decimal
point again will clear the total. Pressing it a third time will
restart the accumulation from zero.
PART 3 - STARTUP AND CONFIGURATION
System and Totalizer
RESET
Reset the Flow
Totalizer