Dynasonics Fusion Water Flow Meter - Manual (Page 40)

40
STATEMENT OF WARRANTY
Dynasonics, a division of Racine Federated Inc. warrants to the
end purchaser, for a period of one year from the date of ship-
ment from the factory, that all flow meters manufactured by it
are free from defects in materials and workmanship. This war-
ranty does not cover products that have been damaged due to
misapplication, abuse, lack of maintenance, modified or improper
installation. Dynasonics’ obligation under this warranty is limited
to the repair or replacement of a defective product, at no charge
to the end purchaser, if the product is inspected by Dynasonics
and found to be defective. Repair or replacement is at Dynason-
ics’ discretion. A return goods authorization (RGA) number must
be obtained from Dynasonics before any product may be re-
turned for warranty repair or replacement. The product must be
thoroughly cleaned and any process chemicals removed before it
will be accepted for return.
The purchaser must determine the applicability of the product for
its desired use and assumes all risks in connection therewith. Dy-
nasonics assumes no responsibility or liability for any omissions
or errors in connection with the use of its products. Dynasonics
will under no circumstances be liable for any incidental, conse-
quential, contingent or special damages or loss to any person or
property arising out of the failure of any product, component or
accessory.
All expressed or implied warranties, including the implied war-
ranty of merchantability and the implied warranty of fit-
ness for a particular purpose or application are expressly
disclaimed and shall not apply to any products sold or services
rendered by Dynasonics.
The above warranty supersedes and is in lieu of all other warran-
ties, either expressed or implied and all other obligations or li-
abilities. No agent or representative has any authority to alter the
terms of this warranty in any way.