ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 6)

Introduction
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
6
Introduction
This Manual describes in depth the installation of the AVT GigE cameras (Big-
eye/Pearleye/Goldeye).
Document history
Manual overview
This manual overview outlines the contents of each chapter of this manual.
• Chapter Contacting Allied Vision Technologies on page 5 lists AVT contact
data (phone numbers and URLs) for both:
– Technical information / ordering
– Commercial information
• Chapter Introduction on page 6 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols).
• Chapter IP-based camera access: background on page 10 gives you back-
ground information when working with IP-based cameras.
• Chapter Installing GigE driver from Pleora on page 18 gives you installing
descriptions when working with the GigE driver from Pleora.
• Chapter Hardware connection and first power up on page 19 describes the
hardware installation procedures.
Note

Please read through this manual carefully.
For more information, see
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature.html
Version Date Description
V2.0.0 03.11.11 New Manual How to install a GigE camera (Bigeye/Pearleye/
Goldeye)
V2.1.0 04.05.12 • Reworked and updated all chapters.
• Corrected screen shot in Chapter Start the continuous snap
on page 23
Table 1: Document history